Digital Counter Remote Master RF Wireless remote duplicator

DIGITAL COUNTER REMOTE MASTER Digital counter Car Codes

Digital counter Car Codes features

1. Digital Counter Remote Master can be used to copy each factory brand's remote control swiftly; including fix code, computer code, and part of roll code.
2. Digital Counter Remote Master is suitable for the remote control and the match of anti-theft annunciator, decoding, debugging and check. (Including Auto theftproof implement, wireless theftproof implement, garage door remote control, and electric control door remote control.
3. Digital Counter Remote Master is equiped with  three remote control (Including size A,B, C).
4. Digital Counter Remote Master is easy to operate according to the introduction in using manual.

Digital Counter Remote Master support IC:

1. HT-12E
2. AX5326-3
3. AX5326-4
4. AX5026
5. PT2262
6. PT2242
7. HT600
8. HT680
9. HT6207
10. HT6010
11. HT6012
12. HT6014
13. MC145026
14. HT640
15. EV1527
16. 527
17. PT2260

DIGITAL COUNTER  Functions:

1. Frequency indicate (25MHz-1GMHz)
2. Data Detect
3. Duplicate /learn Fixed code remote
4. Duplicate /learn part of Rolling code remote
5. Duplicate /learn part of original car keys
6. Compare data (frequency, data, etc.) between remotes after copy
7. Regenerate new remote control
8. Chinese/English bilingual support

Digital Counter Remote Master Package:

    1pc x Digital Counter
    2pc x Red Wires
    1pc x Screw Stick
    1pc x AC Adapter

Attention: No keys included in the package!
 

Digital Counter Remote Master user manual:

1. 4 copy styles as below

Turn on the power, press button "5" for 2 times,interface shows "remot copy"
1).press button"5" for1 time, shows  "1.normal copy"
2).then press button"3" for 1 time, shows  "2.Singkey copy"
3).continue to press button"3" for1 time,shows  "3. MulFreq copy"
4).repeat last step, shows  "4. same SYS copy"    

2. normal remote copy

Turn on the power, press button"5" for 2 times,interface shows "remot copy"
1)press button "5" for more1 time, shows  "1.normal copy"; When the interface shows"1. normal copy", then action as below
2).press button"5 " for1 time, shows "input 1key to", then press the first key of original remote for1 time, the machine sounds "bee" a time, enter into code reading;then press button"5" for 1 time, shows "input 2key to", then press the second key of original remote. Action as this to read all keys one by one;
3).When finished original remote code reading,press button "5" for 2times,shows "input No.1 remote", means insert our new RC (remote control) A, press button "5" for 1 time, then write the code infomation into new remote;
4).Adjust frequency:back to interface"remot copy", press button "4" for 1time to test frequency:put the original remote on the machine and press any key for 1time, shows the frequency. Then put the new RC A on the machine,press key1 one time, use the non-inductive regulator action on the white capacitance to adjust frequency fit.
5).after adjust frequency, press button "1" and button "2" at the same time (if the remote has 5keys, just need to press the 5th key one time), the light flash 1 time.When you press any key there is the light, means copy successfully finished.    

3.other copy method, pls action as the indication in the machine.